You'll feel Nature at your fingertip!!
One of the necessities stuff for Native Americans(Red Men) was Horse Oil. They used it for various purposes like wound medicine, lamp oil, leather maintenance and so on. Especially, leather maintenance was very important works for them. Our Red Man's Horse Oil is 100% pure natural horse oil, not contained any petroleum-based oils/fats or chemical stuff. You’ll feel Nature at your fingertip.

Red Man's Horse Oil is the finest leather care product you've ever had. It revitalizes stiff, weathered leather and softens, protects and extends the life of new leather.

Leather for use:
It can be used on all types of leather but needs attention for follows.
• Test on a small discrete area before applying.
• Some leathers may darken when applied, original color typically returns over time.
• Brushed or rubbed leather like suede or nubuck may darken or looks different when applied. Test in discreet area first.
• Conditioning may bring out natural inconsistencies inherent in all leather.

Upon use:
• Work should be done in a well-ventilated, warm room (15 - 25 ° C).
• There is a possibility of liquefaction at 33 ° C or higher. Please use liquefied hose oil once cooled down to the cream state in the refrigerator.

How to use:
1) Remove the dirt from the leather before maintenance. If it is not soiled, wipe it off with a dry, soft cloth. If the dirt is bad, remove the dirt as much as possible with a leather cleaner.
2) Scoop a small amount of horse oil on a fingertip or soft cotton cloth, avoid thick coating on part, spread thinly and evenly on the whole and apply.
3) After application, wipe off extra horse oil adhering to the leather surface with a dry soft cloth.
4) After completing the work, use a wide hanger inside a well-ventilated room and leave it for more than 3 hours (preferably overnight) in order to complete the natural penetration to the leather of the applied "Red Man's Natural Horse Oil".
5) After confirming the penetration, wipe it with a soft cloth and it is completion.
6) When to apply again, second work should be done after one day (24 hours) since the first applying.